Category Uncategorized

A Quick Review of Drain Clog Products That Actually Work and a Few That 

Do Not. 

As homeowners, we all know the frustration of a clogged drain. Whether it’s in the kitchen, bathroom, or laundry room, dealing with a slow or completely blocked drain can disrupt your daily routine. However, the right products can make all the difference. Here are 10 home repair products that have been proven to work wonders for clearing stopped-up drains.

1. Danger: This one is not for the weekend DIYer. It is very dangerous and can burn your skin instantly or cause damage to your pipes and any surface it comes into contact with. Read and follow all of the directions carefully. With that said it is awesome stuff, it should only be used as a last resort. After pouring this down the drain you can hear the acid in action as it burns through hair, grease and other debris. It is extremely satisfying but also a bit alarming at first you can hear the product as it melts away debris in its path. You will also see a small amount of smoke come out of the drain. 

15/10

One of the most powerful products on the market for tough clogs, Liquid Fire works by generating heat that dissolves obstructions like grease, hair, and other debris. This sulfuric acid-based product can burn through severe clogs that traditional drain cleaners can’t handle. Always use caution when handling this product, as it’s highly corrosive and can cause damage if not used properly.

2. Instant Power Hair & Grease Drain Opener

10/10

This product is fantastic and works extremely well to remove even stubborn clogs. Our master shower clogs every month or two from hair, soap residue etc. I use Instant Power Hair & Grease Drain Opener everytime and it clears the drain for weeks to come. 

Hair and grease are two of the most common culprits of clogged drains, especially in bathrooms and kitchens. Instant Power Hair & Grease Drain Opener is formulated specifically to break down and dissolve these tough materials. Its thick gel clings to blockages and works to dissolve hair, grease, and even soap scum.

3. Boiling Water & Salt

2/10 

Slightly more effective than some of the other Eco friendly options out there, however for anything other than a minor clog it is an ineffective strategy. 

For minor clogs or as a preventative measure, you can rely on a simple and effective homemade solution: a pot of boiling water with a cup of salt. Pour the salt down the drain first, followed by the boiling water. The combination helps to loosen and flush out any buildup, keeping your pipes clear and free of blockages. It’s eco-friendly and works best for small, early-stage clogs.

4. Drano Max Gel Clog Remover

2/10 

I have wasted a lot of money over the years using Drano products and they never seem to work. 

A household name in drain cleaners, Drano Max Gel is thick enough to cut through standing water and target clogs directly. This product works well for all types of drains, including kitchen sinks, shower drains, and bathtubs. Its fast-acting formula breaks down clogs within minutes, leaving your drains running smoothly again.

5. Green Gobbler Drain Clog Dissolver

6/10

This product is Eco friendly which is great, but does not work very well.

If you’re looking for a more eco-friendly option, Green Gobbler Drain Clog Dissolver is an enzyme-based cleaner that effectively breaks down organic materials like hair, food, and grease. This product is biodegradable and won’t harm your pipes or the environment, making it a great choice for homes with septic systems.

6. Zip-It Drain Cleaning Tool

8/10 

Great for getting hair and minor  clogs out easily. 

Sometimes, the problem isn’t so much what’s in the drain as it is how to remove it. The Zip-It Drain Cleaning Tool is a simple yet effective tool that can be used to physically pull out hair and other debris from your drain. Its barbed design makes it easy to grab onto hair clogs and pull them out without the use of chemicals. It’s a cheap, reusable tool that every home should have.

7. FlexiSnake Drain Weasel

8/10 

Great for getting hair and minor  clogs out easily. 

Similar to the Zip-It tool, the FlexiSnake Drain Weasel is another physical tool that helps remove hair clogs from bathroom drains. Its thin, flexible design allows it to navigate through tight spaces, and its rotating handle helps grab and extract hair efficiently. If you’re dealing with a bathroom sink or shower that drains slowly due to hair buildup, this tool is a lifesaver.

8. Baking Soda and Vinegar

0-10 

This one doesn’t work at all unless it is a tiny clog. However it is fun to watch it foam up.

If you prefer a DIY approach, a combination of baking soda and vinegar is a tried-and-true method for clearing minor clogs. Start by pouring a cup of baking soda down the drain, followed by a cup of vinegar. The fizzing reaction helps to break down gunk in the pipes, while the chemical reaction flushes out debris. Follow up with hot water to wash away the residue. This method is non-toxic, inexpensive, and works best for light to medium clogs.

9. RID-X Septic Tank Treatment 

10/10 – I no longer have septic tank but when we did we used this and never had any problems.

If you have a septic system, it’s important to maintain it regularly to avoid larger, more expensive problems down the line. RID-X Septic Tank Treatment is a product that uses natural bacteria and enzymes to break down household waste, helping to prevent clogs and backups in your septic system. While it doesn’t work on immediate clogs, it’s a great preventative product that keeps your system running smoothly over time.

10. Drum Auger – 10/10 

This will do the trick most of the time but some experience is good. 

For stubborn clogs deep in your pipes, a Cobra Drain Auger (also known as a plumber’s snake) is an excellent tool to have on hand. This manually operated device can reach down into your pipes to physically break up and pull out blockages. While it requires a bit more effort than chemical cleaners, it’s highly effective for severe or recurring clogs and can save you a costly visit from the plumber.

Conclusion

Dealing with clogged drains doesn’t have to be a headache when you have the right products and tools. From powerful chemical cleaners like Liquid Fire to eco-friendly solutions like Green Gobbler, there’s a product for every type of clog. Keep these 10 home repair essentials on hand, and you’ll be ready to tackle any drainage problem that comes your way!

Need help with larger home repairs? Contact Mr. Fix It LLC for all your home repair needs! From fixing clogged drains to full-scale renovations, we’ve got you covered.

A Quick Review of Drain Clog Products That Actually Work and a Few That 

Do Not. 

As homeowners, we all know the frustration of a clogged drain. Whether it’s in the kitchen, bathroom, or laundry room, dealing with a slow or completely blocked drain can disrupt your daily routine. However, the right products can make all the difference. Here are 10 home repair products that have been proven to work wonders for clearing stopped-up drains.

1. Danger: This one is not for the weekend DIYer. It is very dangerous and can burn your skin instantly or cause damage to your pipes and any surface it comes into contact with. Read and follow all of the directions carefully. With that said it is awesome stuff, it should only be used as a last resort. After pouring this down the drain you can hear the acid in action as it burns through hair, grease and other debris. It is extremely satisfying but also a bit alarming at first you can hear the product as it melts away debris in its path. You will also see a small amount of smoke come out of the drain. 

15/10

One of the most powerful products on the market for tough clogs, Liquid Fire works by generating heat that dissolves obstructions like grease, hair, and other debris. This sulfuric acid-based product can burn through severe clogs that traditional drain cleaners can’t handle. Always use caution when handling this product, as it’s highly corrosive and can cause damage if not used properly.

2. Instant Power Hair & Grease Drain Opener

10/10

This product is fantastic and works extremely well to remove even stubborn clogs. Our master shower clogs every month or two from hair, soap residue etc. I use Instant Power Hair & Grease Drain Opener everytime and it clears the drain for weeks to come. 

Hair and grease are two of the most common culprits of clogged drains, especially in bathrooms and kitchens. Instant Power Hair & Grease Drain Opener is formulated specifically to break down and dissolve these tough materials. Its thick gel clings to blockages and works to dissolve hair, grease, and even soap scum.

3. Boiling Water & Salt

2/10 

Slightly more effective than some of the other Eco friendly options out there, however for anything other than a minor clog it is an ineffective strategy. 

For minor clogs or as a preventative measure, you can rely on a simple and effective homemade solution: a pot of boiling water with a cup of salt. Pour the salt down the drain first, followed by the boiling water. The combination helps to loosen and flush out any buildup, keeping your pipes clear and free of blockages. It’s eco-friendly and works best for small, early-stage clogs.

4. Drano Max Gel Clog Remover

2/10 

I have wasted a lot of money over the years using Drano products and they never seem to work. 

A household name in drain cleaners, Drano Max Gel is thick enough to cut through standing water and target clogs directly. This product works well for all types of drains, including kitchen sinks, shower drains, and bathtubs. Its fast-acting formula breaks down clogs within minutes, leaving your drains running smoothly again.

5. Green Gobbler Drain Clog Dissolver

6/10

This product is Eco friendly which is great, but does not work very well.

If you’re looking for a more eco-friendly option, Green Gobbler Drain Clog Dissolver is an enzyme-based cleaner that effectively breaks down organic materials like hair, food, and grease. This product is biodegradable and won’t harm your pipes or the environment, making it a great choice for homes with septic systems.

6. Zip-It Drain Cleaning Tool

8/10 

Great for getting hair and minor  clogs out easily. 

Sometimes, the problem isn’t so much what’s in the drain as it is how to remove it. The Zip-It Drain Cleaning Tool is a simple yet effective tool that can be used to physically pull out hair and other debris from your drain. Its barbed design makes it easy to grab onto hair clogs and pull them out without the use of chemicals. It’s a cheap, reusable tool that every home should have.

7. FlexiSnake Drain Weasel

8/10 

Great for getting hair and minor  clogs out easily. 

Similar to the Zip-It tool, the FlexiSnake Drain Weasel is another physical tool that helps remove hair clogs from bathroom drains. Its thin, flexible design allows it to navigate through tight spaces, and its rotating handle helps grab and extract hair efficiently. If you’re dealing with a bathroom sink or shower that drains slowly due to hair buildup, this tool is a lifesaver.

8. Baking Soda and Vinegar

0-10 

This one doesn’t work at all unless it is a tiny clog. However it is fun to watch it foam up.

If you prefer a DIY approach, a combination of baking soda and vinegar is a tried-and-true method for clearing minor clogs. Start by pouring a cup of baking soda down the drain, followed by a cup of vinegar. The fizzing reaction helps to break down gunk in the pipes, while the chemical reaction flushes out debris. Follow up with hot water to wash away the residue. This method is non-toxic, inexpensive, and works best for light to medium clogs.

9. RID-X Septic Tank Treatment 

10/10 – I no longer have septic tank but when we did we used this and never had any problems.

If you have a septic system, it’s important to maintain it regularly to avoid larger, more expensive problems down the line. RID-X Septic Tank Treatment is a product that uses natural bacteria and enzymes to break down household waste, helping to prevent clogs and backups in your septic system. While it doesn’t work on immediate clogs, it’s a great preventative product that keeps your system running smoothly over time.

10. Drum Auger – 10/10 

This will do the trick most of the time but some experience is good. 

For stubborn clogs deep in your pipes, a Cobra Drain Auger (also known as a plumber’s snake) is an excellent tool to have on hand. This manually operated device can reach down into your pipes to physically break up and pull out blockages. While it requires a bit more effort than chemical cleaners, it’s highly effective for severe or recurring clogs and can save you a costly visit from the plumber.

Conclusion

Dealing with clogged drains doesn’t have to be a headache when you have the right products and tools. From powerful chemical cleaners like Liquid Fire to eco-friendly solutions like Green Gobbler, there’s a product for every type of clog. Keep these 10 home repair essentials on hand, and you’ll be ready to tackle any drainage problem that comes your way!

Need help with larger home repairs? Contact Mr. Fix It LLC for all your home repair needs! From fixing clogged drains to full-scale renovations, we’ve got you covered.

DIY Toilet Maintenance Q&A:

Q: How can I repair a continuously running toilet?

A: Often, a malfunctioning flapper is the culprit. Turn off the water supply, inspect the flapper debris, deformed areas or other sings of wear. Let the flapper dry then spread a generous dollop of petroleum jelly around the edge of the flapper that contacts the drain section. This will help create a temporary seal until you can replace the flapper. 

Q: What can I do if my toilet doesn’t flush properly?

A: Adjusting the float ball may improve a weak flush. If it’s too low, gently bend the arm holding the float ball upwards to allow more water into the tank for a stronger flush.

Q: Any tips for unclogging a toilet without a plunger?

A: Pour a mixture of hot water and dish soap into the bowl to lubricate and soften the clog. Alternatively, a combination of baking soda and vinegar can create a fizzing action to dislodge the blockage.

Q: How can I temporarily fix a leaky seal at the toilet’s base?

A: Applying silicone caulk around the base can temporarily stop leaks until you can replace the wax ring.

Q: My fill valve is noisy. Any solutions?

A: Adjust the valve float to reduce pressure and noise. If needed, wrap the valve with cloth or sponge temporarily until you can replace it.

Q: What can I do if my flapper closes too quickly?

A: Attach a small weight, such as a plastic bottle filled with water, to the flapper chain to slow down its closure rate for a complete flush.

Q: How can I prevent condensation on my toilet tank?

A: Wrap the tank with an absorbent towel to manage moisture temporarily. Consider installing an anti-condensation tank liner for a more permanent solution.

Q: Can I use household items to replace a broken tank lever?

A: In a pinch, use a sturdy string or wire to connect the flapper and the lever hole outside the tank for temporary flushing.

Q: How do I fix a fill valve that won’t shut off?

A: Check for obstructions and gently adjust the float arm. If necessary, bend it down to lower the water level. If the issue persists, consider replacing the valve.

Q: Any quick fixes for a loose toilet seat?

A: Wrap the screws with plumbers’ tape or apply epoxy to the screw threads for temporary stabilization.

Q: How can I improve my toilet’s flush strength?

A: Adjust the float valve to increase the water level in the tank, ensuring it doesn’t exceed the overflow tube.

Q: What should I do if my toilet tank fills slowly?

A: Check for kinks or blockages in the water supply line. If clear, partially close and reopen the water supply valve to dislodge any debris. If the problem persists, clean or replace the fill valve.

The Benefits of Hot Water Recirculating Pumps in the realm of home comfort and efficiency, few innovations rival the impact of hot water recirculating pumps.

Often overlooked but immensely beneficial, these devices offer a multitude of advantages that not only improve daily convenience but also contribute to significant energy and water savings. In this review we delve into the world of hot water recirculating pumps, exploring their functionality, benefits, and why they are a worthy addition to any modern household.

What are Hot Water Recirculating Pumps?Hot water recirculating pumps are devices designed to ensure that hot water is readily available at the tap whenever it is needed, eliminating the frustrating wait for hot water to reach the desired temperature.

They work by continuously circulating water through the hot water supply line, maintaining a constant flow of hot water close to the fixtures.

One of the most immediate benefits of installing a hot water recirculating pump is the elimination of the dreaded wait for hot water. With these pumps, hot water is available on demand, reducing the time wasted running taps and waiting for water to heat up.

The continuous circulation of hot water means less water is wasted while waiting for it to reach the desired temperature. This translates to significant water savings over time, particularly in households where water usage is a concern.

Energy Efficiency: By reducing the wait time for hot water, recirculating pumps also contribute to energy savings. Less energy is expended reheating water that has cooled in the pipes, resulting in lower utility bills and a more environmentally friendly home.

 Convenience is key in any modern home, and hot water recirculating pumps deliver just that. Whether it’s for morning showers, washing dishes, or doing laundry, having instant access to hot water streamlines daily routines and enhances overall .

The continuous movement of water through the pipes helps prevent the buildup of sediment and mineral deposits, which can extend the lifespan of plumbing systems and reduce the likelihood of corrosion and clogs.

Many hot water recirculating pumps come with customizable settings, allowing users to tailor the system to their specific needs and preferences. From adjusting circulation schedules to optimizing temperature settings, these features enhance the overall user experience.

Overall review: 5/5 stars

There is a lot of prep you can get out of the way now, so you don’t have to worry about it as Winter bears down on us. A few more of the simpler Winter prep tasks include: changing smoke detector batteries, detaching hoses from outdoor spouts and installing new furnace filters, to help them run more efficiently.

As the cold weather starts to set in, you may also notice that your furnace or water heater just isn’t quite kicking out the same amount of heat or hot water you’re used to, which might mean you need a replacement. Mr. Fix It can help you install a new furnace or water heater at a significant cost savings.

If your furnace is still doing the trick, but you don’t think your home stays as warm as you would like, or maybe you’ve noticed that your Columbia gas bill says your home isn’t as efficient as it could be, maybe it’s time for some upgraded insulation and that’s another item on Mr. Fix It’s list of services. If it’s time for any of these upgrades, or any other home improvement projects you might have in mind, visit our website atwww.jasonkingmrfixit.com, give us a call at 614-596-8396 or email us at jasonking7700@gmail.com and let us know how we can make your Fall a little more comfortable.

The Chamberlain My-Q Smart garage door opener explains itself with the name. For $29.98, it sets out to be a catchall solution for remote access to a garage door complete with intelligent features. By definition, it’s an entry-level smart home gadget — and not one that requires you to jump into the deep end of the smart home world. With just two pieces of hardware, a Wi-Fi connection and the app on your phone, you’ll be able to see the status of your garage door, remotely open or close it and even add household members as users. For $29.98, it’s practically a steal. And after a few weeks of testing, it’s safe to say that it works as promised. Let’s unpack it. Prime Early Access Deal Chamberlain MyQ Smart Garage Door Opener A plug and play setup for remote access Chamberlain The Chamberlain MyQ is truly a no-brainer. It can make nearly any garage door smart and give you the benefits of opening or closing it from anywhere. Today, it’s down to an all-time low price. $29.98 $16.98 at Amazon The who, what and how Who this is for: The Chamberlain MyQ is for someone who wants to control or keep tabs on their garage door from near or afar. What you need to know: Setting up this gadget took about 15 minutes, and it’s quite intuitive. Chamberlain says the MyQ supports most garage door openers made after 1993, but mileage could potentially vary. It also doesn’t support Amazon Alexa or Apple HomeKit integrations. How it compares: For $29.98 (when it’s not on sale), the Chamberlain MyQ is a no-brainer addition to a home with a garage door. It doesn’t require the long install or cost of a new garage door opener with a smart hub built in and supports a long list of openers. Chances are that includes the one in your home. The mandatory app for setup and control is intuitive and less cluttered than other smart options on the market. It doesn’t feature support for core smart home ecosystems like Amazon Alexa or Apple HomeKit. BeamUp is a similar solution that’s more expensive at $77 but supports Alexa out of the box. Those looking for HomeKit integration can look at the $119 iSmartGate. The MyQ and the alternatives all use similar tech to get online, though, and work with most openers made after 1993. An intuitive setup that requires Wi-Fi

In the Chamberlain MyQ Smart Garage Control box, you’ll find two main pieces of hardware and some extras. What you won’t find is a garage door opener, though — the MyQ system works alongside your current garage door to make it smart. The smart hub, which we’ve been affectionately calling the brain, gets mounted on the ceiling, close to the actual garage door motor. It’s a square piece of plastic with technology inside to connect with your garage door, along with some buttons and a power port. Chamberlain didn’t hold back on branding with two big logos. The other piece to the puzzle is a door sensor that will live in the bottom corner of the physical garage door. It’s much smaller in comparison to the hub and opts for a battery. It’s all pretty simple, and Chamberlain includes some mounting tools (a frame and screws) for an easy installation. Alongside the physical hardware, you’ll need the MyQ Garage & Access Control app — it’s available for Android and iOS. The app is the main control panel for both setup and using the MyQ. You’ll also need to create an account, and fair warning, it can take a bit to get the confirmation email. That delay in creating our account was the only delay we experienced. Once you’re in, the MyQ app does an excellent job of providing clear instructions to get you through the process. It took us between 10 and 15 minutes to get the whole system working. And it essentially works by the smart hub acting as a remote control opener. It can send and receive signals with your garage door opener. Chamberlain says the MyQ system should work most garage door openers made after 1993 — some of the big names include Chamberlain, LiftMaster, Craftsman, Genie, Linear and Raynor. A good tell is a “learn button” on your garage door opener, as this is used to send out a signal for pairing with controllers or devices like the MyQ. Modern garage door openers made by Chamberlain even feature the MyQ hub built in. The smart hub also features Wi-Fi 2.4 GHz connectivity for connecting to your home’s Wi-Fi network. Garages can sometimes be a dead zone, especially if they feature concrete walls or are detached from the house. In either of those scenarios, you may need to boost your Wi-Fi’s range, and a solution could be a Wi-Fi extender. If you have a mesh Wi-Fi system, like Eero, you could purchase another node or point to extend your network. There is no way to get around the Wi-Fi requirement, though. And during setup, get ready to see your garage door make some sudden movements. In our experience, it will raise and lower a few times throughout the process. And when it’s done, you’ll be able to control, see a status and even link it with other smart home systems through the app. Open or close with a tap Jacob Krol/CNN The setup process is the only heavy lifting you’ll have to do with the Chamberlain MyQ Smart Garage Controller. You’ll see the garage door status and how long it’s been in that state front and center. For instance, if you closed 40 minutes ago, it will show just that. You can easily tap the garage door to open it as well. You can also view a timeline of sorts that shows you when the door was opened or closed. It’s all quite handy. From a security standpoint, you’ll need to be actively signed in and authenticated to launch the app. You can opt for a passcode on your mobile device or use the built-in authentication method, such as unlocking with a fingerprint or your face. The app at this time doesn’t offer a two-factor authentication solution, but we’re hopeful it could be supported in the future. You can also share access to your home and the garage door (or doors, if you have a multi-car garage) through the Users tab. They’ll need to create a MyQ account and authenticate. And the common theme here is that Chamberlain isn’t adding complex interfaces to access information or functionality. It’s all front and center with menus at the bottom. The Schedules field lets you select predetermined times for actions to happen. It’s an excellent way to make sure the door is closed at night. In terms of compatible systems, you’ll find most of the major players here: Google Assistant, IFTT, Alarm.com, Residio Total Connect and Vivint, among others. The big two that you won’t find support for are Amazon’s Alexa and Apple HomeKit. The former is a big surprise, considering this supports Key by Amazon — the brand’s service that lets delivery drivers open the garage door to leave the package in a secure spot. It’s just strange that you can’t tie this into Alexa. HomeKit is a bit trickier to integrate with, but both would be nice to see in the future. The simple solution here is to use the app; you’ll need it for setup after all. Bottom line At under $30, the Chamberlain MyQ is the easy way to gain remote access for your garage door and make it smart. You don’t need to rush out and spend hundreds on a new opener or opt for a specific brand. It brings a tremendous amount of value, and while it’s not perfect with some missing smart partners, it still offers plenty of functionality. Whether you’re interested in starting a smart home or just want an easier way to control your garage door, the Chamberlain MyQ can stand on its own as a terrific gadget to add to your home. Just keep in mind that you need an opener made after 1993 and will need Wi-Fi in the garage. Otherwise, you’re set up for success.

Today I spent about an hour repairing holes in the tires of two of our service vehicles. Being on various job sites and making runs to the city dump our vehicles pick up their fair share of nails, screws and other pointy objects. These obstructions cause slow leaks that must be taken care of to avoid the dreaded flat tire the morning of a big project or blowout on the highway. The process is fairly simple and once you have done it a few times it is like riding a bike, you can add this easy repair process to your repertoire.

Step 1 – buy a tire repair kit from the local auto repair store. The repair kit will come with a tire reaming tool, the tire implant repair tool and several strips of what looks like black liquorice dipped in tar.

Step 2 – get all tools ready along with an air compressor or the Dewalt 2o Volt cordless inflator if you have one.

Step 3 – can be done with the tire on the car or if you have time can be done after taking the tire off the car. Doing a visual inspection you can normally find the cause of the leak. Using a flat head screw driver or pair of plyers to remove the obstruction. This can take some effort as the head of the screw or other item may have been ground off during driving. Once the object is removed you will know if you found the culprit as air will begin shooting out of the hole left behind.

Step 4 – Using the reaming tool poke the tool into the tire. Push and pull five or six times until there is far less friction than the first insertion. It seems counter productive to repair a hole by making a bigger hole however if you do not enlarge the hole you will not be able to get the repair plug properly inserted into the hole.

Step 5 – Using the plug insertion tool drive the plug into the hole until 2/3 of the repair plug is inserted into the hole. Once fully inserted pull the insertion tool out in one quick motion. The plug will remain in place and will create a permanent seal in the tire.

Step 6 – Using a razor knife cut the excess repair material off flush with the tire.

Step 7 – Use the inflation tool to re-inflate the tire to the proper psi listed on the tire.

We suggest the Dewalt 20 volt cordless inflator. It is small enough to store in any vehicle and yet provides the power of an air compressor two to three times it’s size. We recommend Dewalt tools as the batteries are interchangeable and provide excellent performance and reliability at an affordable price. The Dewalt 20 Volt cordless inflator gets our top 5 hammer rating for performance, ease of use, functionality and at a reasonable price. At $131 this is a tool that every diy and contractor should have on hand for any tire repair and or other inflation needs. I have included the link to the product on Amazon.

Many homeowners start out with the standard laminate backsplash that was installed when the home was built, but for most of us that just doesn’t quite cut it. We would like something more distinctive and unique. A custom tile backsplash might be the perfect solution.

Mr. Fix It can help you find the perfect tile at Floor & Decor, Home Depot, or any other tile store. From there, we will work with you to make sure you select the grout that best fits your style, whether it’s something understated or like in the above image, deep black that provides some contrast to the white subway tile. For this project, we used Mapei Ultra Color Plus Jet Black .

Did your home come complete with those worthless wire shelves in your pantry and other closets? The ones that seem like they have no other purpose than to allow everything you put on them to fall over five seconds after you turn your back. Replace them with solid wooden shelves and metal brackets. If you have all of the food and containers out of the pantry, it may take Mr. Fix It less a day to have your new shelves installed and ready for use. You can find the shelves and brackets at Home Depot or Amazon. The below image links directly to them.

Try to ignore the massive amount of food, sauces, and snacks contained in this (our) pantry, but rather pay attention to the new shelves and slightly more organized structure of the contents of the pantry. If you would like to upgrade your old wire shelves to something closer to these wooden shelves, give Mr. Fix It a call or shoot us an email today for your FREE estimate.